Product ID:MAGNOBOND 69-2,A
MSDS Date:11/28/1995
FSC:8030
NIIN:00-476-5300
MSDS Number: BZFXK

Emergency Phone: 800-457-4280/770-451-2777

Info Phone: 770-451-2777/800-457-4280

Cage: 22121

Telephone: (770) 451-2777/(800) 457-4280

Cage: 22121

EPOXY RESIN *96-1*

CAS: 6508-38-6

Fraction By Weight: 80-90%

Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN/EYES: MODERATELY IRRITATING.
POSSIBLE SKIN SENSITIZER. INGESTION: LOW TOXICITY.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: MODERATELY IRRITATING. POSSIBLE SKIN
SENSITIZER. INGESTION: LOW TOXICITY.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN & EYE DISORDERS.

First Aid:SKIN: WASH W/SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MINS.
INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN IF NECESSARY.
INGESTION: DON'T INDUCE VOMITING. GIVE LARGE DOSES OF WATER. OBTAIN
MEDICAL ATTEN TION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:>200F
Extinguishing Media:WATER SPRAY, FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:AVOID BREATHING SMOKE. IN CONFINED AREAS, USE
NIOSH APPROVED SELF CONTAINED BREATHING APPARATUS. COOL FIRE
EXPOSED CONTAINERS W/WATER.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:AVOID CONTACT W/LIQUIDS & VAPORS. WIPE W/A
CLOTH/COLLECT ANY ABSORBENT MATERIAL. LARGE: DIKE & CONTAIN.
PUMP/SHOVEL INTO SALVAGE VESSELS.

Handling and Storage Precautions:STORE IN A COOL, DRY AREA IN TIGHTLY
CLOSED CONTAINERS. USE W/ADEQUATE VENTILATION. FOR INDUSTRIAL USE
ONLY.
Other Precautions:AVOID CONTACT W/SKIN & EYES.

Respiratory Protection:FOR EXCESSIVE VAPORS/TO MAINTAIN A NIOSH APPROVED RESPIRATOR IN COMPLIANCE TO 29-CFR 1910.134.
Ventilation:LOCAL EXHAUST/MECHANICAL (GENERAL)
Protective Gloves:IMPERVIOUS RUBBER
Eye Protection:SPLASH-PROOF CHEMICAL GOGGLES
Other Protective Equipment:FOR PROLONGED EXPOSURE, IMPERVIOUS CLOTHING
& BOOTS TO MINIMIZE PERSONAL CONTACT. EYE WASH STATION, SAFETY
SHOWER.
Supplemental Safety and Health

Boiling Pt:B.P. Text:>225F
Vapor Pres:0
Vapor Density:>1
Spec Gravity:0.75
Evaporation Rate & Reference:(BU AC=1): <1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:REDDISH-BROWN PASTE
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS & BASES
Stability Condition to Avoid:ELEVATED TEMPERATURES
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN
Conditions to Avoid Polymerization:LARGE MIXTURES IN BULK. CURING
PROCESS IS EXOTHERMIC.

Waste Disposal Methods:CURE, THEN BURY/INCINERATE. REMOVE SALVAGE
VESSELS/DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL
REGULATIONS. CORROSIVE LIQUID, N.O.S.,UN1760.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.